Knowledgebase
How to configure Standalone update manager for Quick Heal EPS 5.X and 6.0.
Posted by Samarth Joshi on 13 January 2015 05:34 PM

How to configure Standalone update manager for Quick Heal EPS 5.X and 6.0.




Quick Heal Update Manager for Quick Heal Endpoint Security 6.0

Quick Heal Update Manager is provided in case the Server that hosts Quick Heal Endpoint Security does not have Internet connection due to security concerns. In such a scenario, users need to install Quick Heal Update Manager on a machine that is connected to the Internet. The machine with Quick Heal Update Manager installed will download the updates. The locations where the updates are downloaded have to be turned into a website by the Administrator using IIS or Apache server. The URL of the created website and Port number can be used by Quick Heal Update Manager on the server to fetch the updates from this machine. The clients in the network, in turn, will fetch the updates from the server.

Quick Heal Update Manager can also be used as an alternate update manager for Quick Heal Endpoint Security clients.
Platforms     :     Windows 2000/Windows XP/Windows 2003/Windows Vista/Windows 7/Windows Server 2008/Windows Server 2008 R2/Windows 8/Windows 8.1/Windows Server 2012 and Windows Server 2012 R2 Operating System (32-bit and 64-bit platforms).


To download the setup of Alternate update manager for 6.0, click on below link.

http://dlupdate.quickheal.com/builds/eps6.0/EPSUM.EXE

Quick Heal Update Manager for Quick Heal Endpoint Security 5.3

To download the setup of Alternate update manager for 5.3, click on below link.

http://download.quickheal.com/builds/eps5.3/EPSUM.EXE

Below are the Steps to configure the alternate update manager.

Please go through following steps:

1. Open Internet Information Services ( IIS ) and after installation of Alternate update manager.

Check Directory browsing is enable for url sharing.

 

Check following options.


 

2.In Mime extension .dat and .bin should be present with their proper type

Click on Add button

Add .dat and MIME type application /octet-stream.

.dat extension will add into the MIME type list.



3.Add virtual Directory in “Default Web Site”


 


4.Add the update path, remember actual update folder should contain child directory “update\1400” folders but not in below path of virtual directory
E.g. If update path is C:\Program Files\Quick Heal\Update Manager 5.50\update\1400
Then physical path should be C:\Program Files\Quick Heal\Update Manager 5.50\



5.Update files must accessible on client side with sub folder update/1400



6.In EPS add update manager as following. Login to the EPS console page, click on Update Manager option.

 

Then click on Alternate update Manager tab.

 

 

7. Insert the path of update i.e. http://[IPAddress]/[AliasNameOfUpdateSharing]

e.g. http://10.10.1.60/QHUpd

 

8.Goto the settings or policy and select “Download from specified update server” from update settings, select the required update manager server link and click Apply.

 

After appling above policy to the group of client system, client will take update from that update mangaer.

 


 

(8 vote(s))
Helpful
Not helpful

Comments (1)
Bhuvanesh Sharma
18 January 2015 02:15 PM
There was a helpful information to us.
Post a new comment
 
 
Full Name:
Email:
Comments: